Novamos Nova R1 Smart Ring with Digital Display for Men Women

By default, the ring is turned off when it leaves the factory. After unpacking, it needs to be charged and activated for the first time. When charging is activated, the charging indicator light on the ring will display red, indicating that the ring has been turned on. For first-time use, please keep charging for at least 1 hour until the charging indicator light on the ring turns green.

Due to the consideration of saving system resources, some mobile phone systems may disable QRING that users have not set up background protection in the background. Therefore, please refer to the background protection guide and enable QRing's background protection function If QRing is already turned on and still shows disconnected, it is possible that the ring has shut down due to low battery. Please charge it before reconnecting.

1. Use tooling to clean

Cotton swab: Cotton swab is a very convenient cleaning tool that can be used to clean the dust from the charging port. Just turn the cotton swab gently to clean the surface dust.

Toothpick: If there is a lot of dust around the charging port, you can use a toothpick to clean it. But be careful to avoid damaging the charging port.

2. Detergent: If the dust on the charging port is stubborn, you can use some detergent to clean it. But be careful to choose a mild cleaner to avoid damaging the ring. At the same time, pay attention to the amount and method of application when using detergent to avoid corrosion or damage to the charging port.

3. Cautions: Pay attention to the method and force when cleaning, do not use too rough methods to avoid damaging the charging port. If the charging port is damaged or cannot be cleaned, we recommend you to contact customer service for helping.

Use a compliant mobile phone charger or computer USB port to connect a charging cable or charging case to charging the ring. When the ring is charging, the red light indicates that it is charging, and the green light indicates that the battery is fully charged.

1. If the ring is not worn and enter sleep mode, QRing will not generate sleep data after the ring synchronizes with QRing.
2. The ring records sleep data at night and cannot record sleep during the day.
3. The user wears a ring and starts recording (deep sleep, light sleep, wakefulness, etc.) within 30 minutes of lying down, and ends sleep monitoring after waking up.
4. All sleep records will be viewed on the QRing sleep interface after the ring is synchronized with QRing.

The time of falling asleep and waking up marked by changes in the physiological characteristics of the human body when entering and waking up from sleep. The sleep state is detected through sensors inside the ring, which may have certain time deviation from one's actual perception.

The human sleep process consists of various sleep states such as light sleep, deep sleep, and wakefulness in the conscious state, most people's body consciousness is still very vague, and users may not be aware of their tendency state, resulting in a deviation between personal feelings and ring detection and recording data.

Sleep detection is achieved through sensors on the ring that detect human activity characteristics. If a user maintains the same posture for a long time without moving, it may be recognized as entering a sleep state.

In the order to reduce the step counting error of the ring caused by frequent hand activities such as typing on the keyboard and playing poker, the ring is set with an initial value of 10, and only when the number of steps reaches 10 in a row, will the step counting officially begin. At the same time, the real-time step count in the QRing main interface will change.

After the user completes the first ring binding, when they open QRing again, the ring will automatically connect to QRing and start synchronizing data; At this point, the user does not need to take any action. If there is an inability to connect, please charge and check again to see if it can connect to QRing and synchronize data.

Clicking the sync button in the upper right corner of the app will automatically synchronize the current data of the ring.

Sure, the ring has 5ATM waterproof performance. But please try not to use it in complex environments such as hot springs or seawater if the ring comes into contact with seawater, please rinse it with fresh water as soon as possible to avoid corrosion of the metal material on the ring caused by the slat in seawater, which may lead to poor contact of the ring charging position.

The normal operating temperature for the ring is -10~45℃(14-11℉). If stored or worn outside the normal temperature range for a long time, it will affect the lifespan and reliability of the ring, which may affect its normal use.

After updating the firmware, the APP will synchronize the device's historical data with the server, which take about 3–5 seconds. It needs to wait for the data synchronization to complete before connecting to the ring.

For optimal performance and accuracy, it is recommended that you wear the ring on the index finger of your non-dominant hand. If you wear it on your middle and ring fingers, the heart rate sensor should be located on the palm of your hand, and the ring should be comfortably placed close to the skin at the base of your fingers. Please try to keep the inside of the ring dry when wearing it, and avoid soaking the skin of the finger wearing area with sweat or other liquids for a long time, which may cause skin damageHR, SPO2 Sensor.

If QRing is uninstalled and reinstalled, the data saved locally by QRing will be lost Recommend users to register for Ring ID and use it to log in.

Maintain Bluetooth connection between the ring and the phone; Click the remote camera button in QRing; Gently shake the hand wearing the ring to complete the photo PS. For first-time use, it is necessary to follow the QRing prompt and allow permission to call the system camera

The health index is obtained through comprehensive evaluation based on the sleep, exercise, stress, heart rate, and blood oxygen data collected by the ring. Among them, sleep data is the most basic data. If the wearing time is too short or there is no sleep data, the health index cannot be generated. We suggest that you continue to wear the ring to unlock your health index.